Waste Fittings
|
-
40 CTS x 250 x 250mm Flush Pipe
SKU: CB0540
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This pipe is for connecting the cistern to the pan on a toilet.
It can be trimmed on install in both directions.
Please note that this item is not supplied with nuts or washers. Learn More -
50 CTS x 600mm Double Bowl Sink Connector
SKU: CB7080
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This connector is used for connecting two sink wastes with 2" BSP male threads to use a single 50mm S Trap or P Trap.
The outlet of the connector has a 2" BSP male thread.
The horizontal span between sink wastes is trimmable at time of install. Learn More -
50 CTS x 325mm Double Bowl Sink Connector
SKU: CB7075
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This connector is used for connecting two sink wastes with 2" BSP male threads to use a single 50mm S Trap or P Trap.
The outlet of the connector has a 2" BSP male thread.
The horizontal span between sink wastes is trimmable at time of install. Learn More -
Cap & Lining - 50mm CTS x 180mm
SKU: SA7864
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
50mm Non-Pressure Cap & Lining x 180mm Long with Cover Plate.
The inlet has a 2" BSP loose nut with crimp & o-ring. The outlet is 50 CTS (50.8mm diameter) tube.
Typically used for connecting the underneath of bath with a 50mm plug & waste nicely to the floor.
Cover plate is 86mm O.D. with 20mm rise. Learn More -
Cap & Lining - 40mm CTS x 300mm
SKU: SA7863
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
40mm Non-Pressure Cap & Lining x 300mm Long with Cover Plate.
The inlet has a 1 ½" BSP loose nut with crimp & o-ring. The outlet is 40 CTS (38.1mm diameter) tube.
Typically used for connecting the underneath of bath with a 40mm plug & waste nicely to the floor.
Cover plate is 86mm O.D. with 20mm rise. Learn More -
50 CTS x 670mm x 360mm Drop Waste Bend
SKU: CB0532
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This bend is useful for connecting a P Trap to the floor.
It can be trimmed on install in both directions.
Please note that this item is not supplied with nuts or washers. Learn More -
50 CTS x 620mm x 150mm Drop Waste Bend
SKU: CB0531
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This bend is useful for connecting a P Trap to the floor.
It can be trimmed on install in both directions.
Please note that this item is not supplied with nuts or washers. Learn More -
40 CTS x 670 x 360mm Drop Waste Bend
SKU: CB0529
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This bend is useful for connecting a P Trap or Bottle Trap to the floor.
It can be trimmed on install in both directions.
Please note that this item is not supplied with nuts or washers. Learn More -
40 CTS x 620 x 150mm Drop Waste Bend
SKU: CB0528
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
This bend is useful for connecting a P Trap or Bottle Trap to the floor.
It can be trimmed on install in both directions.
Please note that this item is not supplied with nuts or washers. Learn More -
50 CTS x 600mm Trap Extension
SKU: CB5430
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Trap extensions are particularly useful for extending the inlet height of a P trap when needing the match the height of the connection lower down in the wall. The compression end is trimmable.
The inlet is 50 CTS (50.8mm diameter) with a compression nut & rubber olive.
The outlet has a 2" BSP male thread. Learn More -
50 CTS x 450mm Trap Extension
SKU: CB5420
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Trap extensions are particularly useful for extending the inlet height of a P trap when needing the match the height of the connection lower down in the wall. The compression end is trimmable.
The inlet is 50 CTS (50.8mm diameter) with a compression nut & rubber olive.
The outlet has a 2" BSP male thread. Learn More -
50 CTS x 300mm Trap Extension
SKU: CB5410
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Trap extensions are particularly useful for extending the inlet height of a P trap when needing the match the height of the connection lower down in the wall. The compression end is trimmable.
The inlet is 50 CTS (50.8mm diameter) with a compression nut & rubber olive.
The outlet has a 2" BSP male thread. Learn More -
50 CTS x 150mm Trap Extension
SKU: CB5400
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Trap extensions are particularly useful for extending the inlet height of a P trap when needing the match the height of the connection lower down in the wall. The compression end is trimmable.
The inlet is 50 CTS (50.8mm diameter) with a compression nut & rubber olive.
The outlet has a 2" BSP male thread. Learn More -
40 CTS x 600mm Trap Extension
SKU: CB5330
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Trap extensions are particularly useful for extending the inlet height of a bottle trap or P trap when needing the match the height of the connection lower down in the wall. The compression end is trimmable.
The inlet is 40 CTS (38.1mm diameter) with a compression nut & rubber olive.
The outlet has a 1 ½" BSP male thread. Learn More -
40 CTS x 450mm Trap Extension
SKU: CB5320
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Trap extensions are particularly useful for extending the inlet height of a bottle trap or P trap when needing the match the height of the connection lower down in the wall. The compression end is trimmable.
The inlet is 40 CTS (38.1mm diameter) with a compression nut & rubber olive.
The outlet has a 1 ½" BSP male thread. Learn More