Valves, Washers & Seals
Loading, please wait...-
Hydroseal DR Brass Jumper Valve
SKU: PA8032
High quality DR brass hydroseals are standard all CB Rapid Action tapware.
Hydroseals are now also standard on all of our full turn tapware.
(Please note that hydroseals are not used in flick mixers). Learn More
Ex GST: AUD $5.60 Inc GST: AUD $6.16 -
O-Ring for Standard CB Spindle (BS008.5) - Pack of 10
SKU: PA8003
This o-ring is for our standard jumper valve spindles.
Standard jumper valve spindle requires 1 o-ring.
Packet of 10 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store. Learn More
Ex GST: AUD $10.00 Inc GST: AUD $11.00 -
O-Ring for Rapid Action Spindle (BS110) - Pack of 10
SKU: PA8004
This o-ring is for our Rapid Action spindles.
Rapid Action spindles require 2 to 3 o-rings per spindle (will vary by range & spindle type).
Packet of 10 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $10.00 Inc GST: AUD $11.00 -
Seal Kit for CB Standard Outlet Swivel
SKU: PA8005
This kit is for replacing the o-rings, nylon and grub screw on your swivel outlet. Suitable for use on most CB standard outlet swivels (will not fit the swivel of our drinking water pillar taps).
Kit includes qty 2 of BS113 o-rings, qty 1 of swivel nylon, qty 1 of M4 x 4mm SS304 grub screw and qty 1 of 2mm allen key.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store. Learn More
Ex GST: AUD $10.00 Inc GST: AUD $11.00 -
Seal Kit for CB Duo Mixer Outlet Swivel
SKU: PA8006
This kit is for replacing the o-rings, nylon and grub screw on your swivel outlet. Suitable for use on CB Duo mixer outlet swivels.
Kit includes qty 2 of BS113 o-rings, qty 1 of swivel nylon, qty 1 of M4 x 6mm SS304 grub screw and qty 1 of 2mm allen key.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store. Learn More
Ex GST: AUD $10.00 Inc GST: AUD $11.00 -
O-Rings for CB Standard Outlet Swivel or CB Lab Swivel
SKU: PA8007
This kit is for replacing the o-rings on your CB swivel outlet. Suitable for use on CB standard outlet swivels and CB laboratory outlet swivels (will not fit the swivel of our drinking water pillar taps).
Kit includes qty 2 of BS113 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store. Learn More
Ex GST: AUD $5.00 Inc GST: AUD $5.50 -
Bonnet Fibre Washer
SKU: PA8072
Fibre washer to suit our standard and Rapid Action bonnets.
This washer provides the seal between the bonnet (what the spindle runs through) and the tap body. Learn More
Ex GST: AUD $2.10 Inc GST: AUD $2.31 -
Replacement Ceramic Cartridge & Button Kit for CB Flick Mixers & DB Series Mixers
SKU: PA8320
This code provides a cartridge and a replacement sticker button only. Please select preferred colour.
This button type is only really recommended for Chrome or Antique Brass finishes, other custom finishes generally require use of the engraved button. On later versions of the mixers the standard button is more easily removable so the button does not need to be replaced. (The engraved button option was only made available after this improvement).
We use a uniform size cartridge between all of our flick mixers. Learn More
Ex GST: AUD $29.40 Inc GST: AUD $32.34 -
Replacement Ceramic Cartridge for CB Flick Mixers & DB Series Mixers
SKU: PA8040
Replacement Ceramic Cartridge for CB Flick Mixers & DB Series Mixers
This code provides a cartridge only.
We use a uniform size cartridge between all of our flick mixers. Learn More
Ex GST: AUD $24.34 Inc GST: AUD $26.77 -
Fibre Washer Only for Union Nut & Tail
SKU: PA8078
This fibre washer seals the union nut & tail on our cast diverter bodies. It is also used on exposed tap sets which have loose nut connections to the wall. Learn More
Ex GST: AUD $2.10 Inc GST: AUD $2.31 -
Adjustable Shower Arm Seal Kit
SKU: PA8274
This kit is for replacing the fibre washers, rubber washers & o-ring on our RU6651 Adjustable Shower Arm.
Kit includes qty 1 of BS112 o-ring for the ball joint, qty 4 of fibre washers and qty 2 of rubber washers for the arm pivot points. Learn More
Ex GST: AUD $22.73 Inc GST: AUD $25.00 -
Fibre Washer for Outlet Tail
SKU: PA8065
Fibre washer to suit our outlet tails.
This washer goes between the outlet's locking nut and the bottom of the mounting surface.
Outside Diameter = 1 & 1/2" (approx. 38.1mm)
Internal Diameter = 15/16" (approx 23.8mm) Learn More
Ex GST: AUD $2.50 Inc GST: AUD $2.75