Bonnet & Spindles
|
|
Loading, please wait...-
Hydroseal DR Brass Jumper Valve
SKU: PA8032
High quality DR brass hydroseals are standard all CB Rapid Action tapware.
Hydroseals are now also standard on all of our full turn tapware.
(Please note that hydroseals are not used in flick mixers). Learn More
Ex GST: AUD $5.60 Inc GST: AUD $6.16 -
O-Ring for Standard CB Spindle (BS008.5) - Pack of 10
SKU: PA8003
This o-ring is for our standard jumper valve spindles.
Standard jumper valve spindle requires 1 o-ring.
Packet of 10 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store. Learn More
Ex GST: AUD $10.00 Inc GST: AUD $11.00 -
O-Ring for Rapid Action Spindle (BS110) - Pack of 10
SKU: PA8004
This o-ring is for our Rapid Action spindles.
Rapid Action spindles require 2 to 3 o-rings per spindle (will vary by range & spindle type).
Packet of 10 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $10.00 Inc GST: AUD $11.00 -
Heritage Bib / Pillar Bonnet & Standard Action Spindle
SKU: HE2003
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Ex GST: AUD $57.62 Inc GST: AUD $63.38 -
Heritage Bib / Pillar Bonnet & Rapid Action Spindle
SKU: HE2003-RACT-
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Heritage Rapid Action has a different look to Standard Action, the bonnet is covered with a sheath like on Roulette.
A = 78mm
B = 25mm
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55 -
Torrens Flared Lever Wall Bonnet & Rapid Action Spindle
SKU: TF2505
Torrens Flared Lever Wall Bonnet & Rapid Action Spindle
Specify in Order Notes if Hot or Cold Required.
Turning direction diagram available in FAQ Section.
A = 79mm
B = 44mm
(Please note this spindle is also used for the Forward Bowl Sink Set underassembly, as more height is required than the Basin/Vanity spindle).
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here.
This bonnet & spindle is only supplied in Raw Brass as it is not visible when installed. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55 -
Heritage Wall Bonnet & Standard Action Spindle
SKU: HE2005
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 95mm
B = 42mm
(Please note this spindle is also used for the Forward Bowl Sink Set underassembly, as more height is required than the Basin/Vanity spindle). Learn More
Ex GST: AUD $57.62 Inc GST: AUD $63.38 -
Heritage Wall Bonnet & Rapid Action Spindle
SKU: HE2005-RACT-
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 95mm
B = 36mm
(Please note this spindle is also used for the Forward Bowl Sink Set underassembly, as more height is required than the Basin/Vanity spindle).
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55 -
Heritage Wall Bonnet & Standard Action Spindle with 15mm Extension of Handle Height
SKU: HE2007
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 110mm
B = 42mm without supplied adjustable (removable) extension piece on bonnet, between 50mm to 60mm with supplied adjustable (removable) extension piece on bonnet.
The extended bonnet & spindle can help deal with situations where the breech is mounted deeper inside the wall. Depending on the situation you may also need to add a Trouble Ring to the wall flange, these are separate items and are additional cost. Learn More
Ex GST: AUD $64.68 Inc GST: AUD $71.15 -
Heritage Wall Bonnet & Rapid Action Spindle with 15mm Extension of Handle Height
SKU: HE2007-RACT-
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 110mm
B = 36mm without supplied adjustable (removable) extension piece on bonnet, between 48mm to 59mm with supplied adjustable (removable) extension piece on bonnet.
The extended bonnet & spindle can help deal with situations where the breech is mounted deeper inside the wall. Depending on the situation you may also need to add a Trouble Ring to the wall flange, these are separate items and are additional cost.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $89.38 Inc GST: AUD $98.32 -
Heritage Basin & Vanity Bonnet & Standard Action Spindle
SKU: HE2006
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 78mm
B = 33mm
These measurements are worth checking as older basin & sink tap sets used a wall sized bonnet & spindle. See product code HE2005. Learn More
Ex GST: AUD $57.62 Inc GST: AUD $63.38 -
Heritage Basin & Vanity Bonnet & Rapid Action Spindle
SKU: HE2006-RACT-
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 78mm
B = 33mm
These measurements are worth checking as older basin & sink tap sets used a wall sized bonnet & spindle. See product code HE2005-RACT.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55 -
Roulette Bib / Pillar Bonnet & Standard Action Spindle
SKU: RU2003
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Ex GST: AUD $57.62 Inc GST: AUD $63.38 -
Roulette Bib / Pillar Bonnet & Rapid Action Spindle
SKU: RU2003-RACT-
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 78mm
B = 25mm
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55 -
Roulette Wall Bonnet & Standard Action Spindle
SKU: RU2005
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
A = 95mm
B = 42mm
(Please note this spindle is also used for the Forward Bowl Sink Set underassembly, as more height is required than the Basin/Vanity spindle). Learn More
Ex GST: AUD $57.62 Inc GST: AUD $63.38