Your Currency
Australian DollarUnited States Dollar

Bonnet & Spindle Extensions

Metal Finish Info Icon
  • Unless noted, all pricing shown below is the Recommended Retail Price (RRP) for the Chrome Plate metal finish (this is the finish code: CP).
  • Please use the Finish Code drop-down menu on the individual product pages to view pricing for other metal finishes, such as brass, gold, copper and other colours.
  • The Finish Code drop-down menu on the product page provides you with the list of metal finishes that a particular product is available in.
  • The Finishes Guide tab on the product page is helpful for selecting the right metal finish.

Grid List

Set Descending Direction

3 Item(s)

  1. Deep Seat Raw Brass Spindle Extension (40mm Long)

    SKU: PA1532RB

    This extension is usually only suitable for basin taps with normal jumper valves.

    Should not be used with our Rapid Action sets.*

    Should not be used on the wall taps (wall top assemblies).*

    These extensions are designed to allow for being cut down at the time of installation to suit the depth required.

    If you would like us to machine down the extension piece to a specific length before sending we can do this for you. Learn More
    Photo: PA1532RB Deep Seat Raw Brass Spindle Extension
    This product has a photo.
    Ex GST: AUD $29.48 Inc GST: AUD $32.43
  2. Bonnet Thread Extension (15 BSP) (Adds 15mm to Bonnet Thread) [Raw Brass]

    SKU: PA1178RB

    These extensions are designed to help counteract deep seats in walls by allowing more thread for the flange to screw on to.

    These are suitable for extending standard action wall taps (wall top assemblies). The tap you require this extension for should be noted to CB when ordering.

    If the breech is too deep in the wall you may need a combination of this component and a top assembly with a longer spindle to provide a satisfactory resolution. Please see the relevant spares section for suitable spindles. Extended bonnets & spindles are supplied with a bonnet thread extension piece.

    Depending on the situation you may also need to add Trouble Rings to the wall flanges which are separate items and additional cost. Learn More
    Photo: PA1178RB Bonnet Thread Extension (15 BSP) (Adds 15mm to Bonnet Thread)
    This product has a photo.
    Ex GST: AUD $15.39 Inc GST: AUD $16.93
  3. Bonnet Thread Extension (5/8 BSP) (Adds 15mm to Bonnet Thread) [Raw Brass]

    SKU: PA8280RB

    These extensions are designed to help counteract deep seats in walls by allowing more thread for the flange to screw on to.

    These are suitable for extending Rapid Action wall taps (wall top assemblies). The tap you require this extension for should be noted to CB when ordering.

    If the breech is too deep in the wall you may need a combination of this component and a top assembly with a longer spindle to provide a satisfactory resolution. Please see the relevant spares section for suitable spindles. Extended bonnets & spindles are supplied with a bonnet thread extension piece.

    Depending on the situation you may also need to add Trouble Rings to the wall flanges which are separate items and additional cost. Learn More
    Photo: PA8280RB Bonnet Thread Extension (5/8 BSP) (Adds 15mm to Bonnet Thread)
    This product has a photo.
    Ex GST: AUD $15.39 Inc GST: AUD $16.93

Grid List

Set Descending Direction

3 Item(s)