Spindles
All Roulette Lever spindles use our Rapid Action® mechanism, some design changes have occurred over the decades and in some customer applications wall spindles have been used on basins to achieve more spindle height. If unsure please contact CB with a photograph and spindle dimensions for identification. Please use our Rapid Action Turning Directions diagram to specify turning direction when ordering.
You may not need to replace the whole spindle, hydroseals and o-ring packs are available below.
|
|
Loading, please wait...-
Hydroseal DR Brass Jumper Valve
SKU: PA8032
High quality DR brass hydroseals are standard all CB Rapid Action tapware.
Hydroseals are now also standard on all of our full turn tapware.
(Please note that hydroseals are not used in flick mixers). Learn More
Ex GST: AUD $5.60 Inc GST: AUD $6.16 -
O-Ring for Rapid Action Spindle (BS110) - Pack of 10
SKU: PA8004
This o-ring is for our Rapid Action spindles.
Rapid Action spindles require 2 to 3 o-rings per spindle (will vary by range & spindle type).
Packet of 10 o-rings.
Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $10.00 Inc GST: AUD $11.00 -
Roulette Lever Bib / Pillar Bonnet & Rapid Action Spindle
SKU: RL2503
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Specify in Order Notes if Hot or Cold Required.
Lever turning direction diagram available in FAQ Section. Figure 1.2 (also is Figure 3.2) is shown in photo, Figure 1.1 (also is Figure 3.1) has a line marking on the bonnet's square section.
A = 78mm
B = 25mm
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55 -
Roulette Lever Wall Bonnet & Rapid Action Spindle
SKU: RL2505
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Specify in Order Notes if Hot or Cold Required.
Lever turning direction diagram available in FAQ Section. Figure 1.2 is shown in photo, Figure 1.1 has a line marking on the bonnet's square section.
A = 95mm
B = 36mm
(Please note this spindle is also used for the Forward Bowl Sink Set underassembly, as more height is required than the Basin/Vanity spindle).
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55 -
Roulette Lever Wall Bonnet & Rapid Action Spindle with 15mm Extension of Handle Height
SKU: RL2507
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Specify in Order Notes if Hot or Cold Required.
Lever turning direction diagram available in FAQ Section. Figure 1.2 is shown in photo, Figure 1.1 has a line marking on the bonnet's square section.
A = 110mm
B = 36mm without supplied adjustable (removable) extension piece on bonnet, between 48mm to 59mm with supplied adjustable (removable) extension piece on bonnet.
The extended bonnet & spindle can help deal with situations where the breech is mounted deeper inside the wall. Depending on the situation you may also need to add a Trouble Ring to the wall flange, these are separate items and are additional cost.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $89.38 Inc GST: AUD $98.32 -
Roulette Lever Basin & Vanity Bonnet & Rapid Action Spindle
SKU: RL2506
Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.
Specify in Order Notes if Hot or Cold Required.
Lever turning direction diagram available in FAQ Section. Figure 3.2 is shown in photo, Figure 3.1 has a line marking on the bonnet's square section.
A = 78mm
B = 33mm
These measurements are worth checking as older basin & sink tap sets used a wall sized bonnet & spindle. See product code RL2505.
Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
Ex GST: AUD $82.32 Inc GST: AUD $90.55