Your Currency
Australian DollarUnited States Dollar

Spindles

Some design changes have occurred over the decades and in some customer applications wall spindles have been used on basins to achieve more spindle height. If unsure please contact CB with a photograph and spindle dimensions for identification. Please use our Rapid Action Turning Directions diagram to specify turning direction when ordering.

The Torrens Flared Lever style uses our Rapid Action® (1/4 Turn) spindles as standard for simple maintenance. A full explanation of the advantages of our Rapid Action® mechanism can be found in the Rapid Action (1/4 Turn) FAQ.

You may not need to replace the whole spindle, hydroseals and o-ring packs are available below.

Metal Finish Info Icon
  • Unless noted, all pricing shown below is the Recommended Retail Price (RRP) for the Chrome Plate metal finish (this is the finish code: CP).
  • Please use the Finish Code drop-down menu on the individual product pages to view pricing for other metal finishes, such as brass, gold, copper and other colours.
  • The Finish Code drop-down menu on the product page provides you with the list of metal finishes that a particular product is available in.
  • The Finishes Guide tab on the product page is helpful for selecting the right metal finish.

Grid List

Set Descending Direction

7 Item(s)

  1. Hydroseal DR Brass Jumper Valve

    SKU: PA8032

    High quality DR brass hydroseals are standard all CB Rapid Action tapware.

    Hydroseals are now also standard on all of our full turn tapware.

    (Please note that hydroseals are not used in flick mixers). Learn More
    Photo: PA8032
    This product has a photo.
    Ex GST: AUD $5.60 Inc GST: AUD $6.16
  2. O-Ring for Rapid Action Spindle (BS110) - Pack of 10

    SKU: PA8004

    This o-ring is for our Rapid Action spindles.

    Rapid Action spindles require 2 to 3 o-rings per spindle (will vary by range & spindle type).

    Packet of 10 o-rings.

    Remember to grease o-rings with food grade plumbing grease when replaced. This type of grease should be available from your local plumbing supply store.

    Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
    Photo: PA8004 O-Ring for Rapid Action Spindle (BS110) - Pack of 10
    This product has a photo.
    Ex GST: AUD $10.00 Inc GST: AUD $11.00
  3. Torrens Flared Lever Bib / Pillar Bonnet & Rapid Action Spindle

    SKU: TF2503
    Metal Finish Info Icon Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.


    Torrens Flared Lever Bib / Pillar Bonnet & Rapid Action Spindle

    Specify in Order Notes if Hot or Cold Required.

    Turning direction diagram available in FAQ Section.

    A = 52mm
    B = 25mm

    Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here. Learn More
    Photo: TF2503 in Chrome Plate (CP) finish
    This product has a photo.
    Ex GST: AUD $82.32 Inc GST: AUD $90.55
  4. Torrens Flared Lever Wall Bonnet & Rapid Action Spindle

    SKU: TF2505

    Torrens Flared Lever Wall Bonnet & Rapid Action Spindle

    Specify in Order Notes if Hot or Cold Required.

    Turning direction diagram available in FAQ Section.

    A = 79mm
    B = 44mm

    (Please note this spindle is also used for the Forward Bowl Sink Set underassembly, as more height is required than the Basin/Vanity spindle).

    Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here.

    This bonnet & spindle is only supplied in Raw Brass as it is not visible when installed. Learn More
    Photo: TF2505 in Raw Brass (RB) finish
    This product has a photo.
    Ex GST: AUD $82.32 Inc GST: AUD $90.55
  5. Torrens Flared Lever Basin & Vanity Bonnet & Rapid Action Spindle

    SKU: TF2502

    Torrens Flared Lever Basin & Vanity Bonnet & Rapid Action Spindle

    Specify in Order Notes if Hot or Cold Required.

    Turning direction diagram available in FAQ Section.

    A = 70mm
    B = 37mm

    Installation & servicing instructions for Rapid Action® spindles are supplied with the tapware but are also available for download here.

    This bonnet & spindle is only supplied in Raw Brass as it is not visible when installed. Learn More
    Photo: TF2502 in Raw Brass (RB) finish
    This product has a photo.
    Ex GST: AUD $82.32 Inc GST: AUD $90.55
  6. Torrens Bib / Pillar Self Closing Bonnet & Spindle

    SKU: TF2503-SFCL-
    Metal Finish Info Icon Use the Finish Code drop-down menu on the product page to calculate the price in various metal finishes.


    Torrens Bib / Pillar Self Closing Bonnet & Spindle

    Suitable for use with Torrens Capstan, Torrens Lever & Torrens Flared Lever bib / pillar top assemblies. Learn More
    Photo: TF2503-SFCL in Chrome Plate (CP) finish
    This product has a photo.
    Ex GST: AUD $108.57 Inc GST: AUD $119.43
  7. Nylon Olive for Torrens Flared Lever & Celestial Lever Wall Spindle

    SKU: PA8035

    This nylon olive is a spare part for select Torrens Flared Lever and Celestial wall bonnet & spindles. Learn More
    Photo: PA8035 Nylon Olive for Torrens Flared Lever & Celestial Lever Wall Spindle
    This product has a photo.
    Ex GST: AUD $2.10 Inc GST: AUD $2.31

Grid List

Set Descending Direction

7 Item(s)